HP4400C / HP4470C / HP3500 / HP3570 / HP3530 SANE Webpage
PLEASE NOTE, THAT'S A UNTESTED ALPHA VERSION. NO WARANTY!!
This is the 14. „alpha“ version of a
preview for a scanner driver with a RTS88xx chipset for Linux.
Manufacturer | Model | ASIC | Analog front-end | USB ID |
Hewlett-Packard | HP4400c |
ASIC 13010070-5011 (RealTek RTS8891) |
built-in |
0x3f0 0x0705 |
Hewlett-Packard | HP4470c |
ASIC 13010070-5011 (RealTek RTS8891) | built-in | 0x3f0 0x0805 |
Hewlett-Packard | HP3500c | RealTek RTS8801C2 |
built-in | 0x3f0 0x2205 |
Hewlett-Packard | HP3570c | RealTek RTS8801C2 | built-in | 0x3f0 0x2005 |
Hewlett-Packard | HP3530c | RealTek RTS8801 | built-in | 0x3f0 0x2005 |
Grayscale scan with 300dpi / 600dpi.
Using the SANEI interface for the Linux Scanner driver module and libusb.
Additional CCD (CCD1 / CCD2)implemented, my scanner have a CCD1 included.
HP4470C: XPA is usable.
Control for BRIGHTNESS implemented.
Tested with xsane; Kooka; xscanimage; scanimage
this is today a development version and
doesn't work today
Using the Linux Scanner driver module / libusb.
I need help in the future to implement
this scanner into this backend. Please contact me.
was under
SuSe Linux 8.0/9.0/9.1/9.2 with
kernel 2.4.19/2.4.21/2.6.4/2.6.8 on a Athlon 1GHz.
Only for Linux today.
You need the SANE sources (ver. 1.0.xx) from http://www.sane-project.org/
Kernel 2.4: To use the Scanner module check if it is loaded! Load them with „modprobe scanner vendor=0x3f0 product=0x805 “ (hp4470c, 0x805 = hp4400c).
You need the frondends „Xsane“ , „XscanImage“ or „Kooka“ installed on your PC.
Include the HP_RTS88xx backend-souces into the SANE sources.
Go into sane_hp_rts88xx/sane_hp_rts88xx and start patch-sane.sh for patch the SANE sources.
Start „./configure“ , „make“ and „make install“ on the root folder from the SANE sources. Please read „README“ and „README.linux“ for more.
Check the installation with „scanimage -L“. It will show the installed driver. If no, please read „README“ and „README.linux“ for more.
Modify /etc/sane.d/hp_rts88xx.conf : If you see a black image, change the CCD (HP44x0C).
Additional for SuSe Linux users : use the HP4100 driver for installation under YaST. Modify /etc/sane.d/dll.conf : include hp_rts88xx and disable all another drivers.
You can find more information's about SANE installation by the sane-troubleshoot Homepage
Here my additional README.
Last update Dec. 02, 2004 Johannes Hub